Doctor of Philosophy PhD

·          The candidates for Ph.D program may be offered admission, based on certain minimum academic requirements to be satisfied by the candidates as given below:

·          Faculty of Engineering: Candidates holding bachelor’s and master’s degree in Engineering/Technology in their  relevant discipline with a minimum 6.5 CGPA or 60% marks in both bachelor’s and master’s levels from recognized technical institute or university.(Minimum 6.0 CGPA or 55% marks for SC/ST candidates).

·          Faculty of Science (Chemistry, Physics and Mathematics): Candidates holding bachelor’s and master’s degree in Sciences in the relevant discipline with a minimum 6.5 CGPA or 60% marks in both bachelor’s and master’s levels from recognized institute or university. (Minimum 6.0 CGPA or 55% marks for SC/ST candidates).

·          Faculty of Computer Applications: Candidates holding MCA/M.Tech in Engineering with a minimum 6.5 CGPA or 60% marks in master’s levels from recognized institute or  university. (Minimum 6.0 CGPA or 55% marks for SC/ST candidates).

·          Candidates having valid GATE/CSIR/NBHM/UGC-NET score will get preference.

·          The application form and other relevant information for admission to Ph.D program may be downloaded from the institute website: www.nitjsr.ac.in.

·          Applications form, duly filled in, must contain a crossed demand draft for Rs. 1,500/- (Rs. 750/- for SC/ST candidates) towards application fee drawn in favour of Director, National Institute of Technology, Jamshedpur payable at SBI RIT Jamshedpur (Code 1882) and should reach Chairman-(PG&R) Admission NIT Jamshedpur-831014.  

Last date for Submission form:  29th December 2017 

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

MTech Power System Engineering

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2016 examination of the qualifying degree can also apply.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

MTech Industrial and Management Engineering

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2015 examination of the qualifying degree can also apply.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

Last date for Submission form: 01st June, 2015

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News  BlogSpot ~~!!~~ Scholarship BlogSpot

MTech (Energy System and Management)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Design of Mechanisms and Structures)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Geo Technical Engineering)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Structural Engineering)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (VLSI and Embedded Systems)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Automated Manufacturing System)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Chemistry)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Foundry Technology)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Extractive Met. of Iron and Steel)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here

MTech (Computer Integrated Design and Manufacturing)

Candidates must have passed Bachelor of Engineering degree or its equivalent in appropriate branch of Engineering / Technology from a recognized University. For Production and Industrial Engineering branch the eligibility criteria for the above courses are BTech / BSc Engineering / BE or its equivalent degree in Mechanical engineering / Production and Industrial Engineering / Production Engineering and Management / Production Engineering / Industrial Engineering / Automobile Engineering Candidates with MSc in Chemistry with Mathematics and Physics at BSc Level or MSc in physics with Chemistry and Mathematics at BSc level or degree in Chemical / Mechanical  /Metallurgical Engineering are eligible for admission to M Tech. in Surface Science and Engineering. Candidates appearing in 2009 examination of the qualifying degree can also apply but they will have to produce the result by 31st August 2009. Only candidates of Surface Science and Engineering May produce result up to 30.09.2009.

Selection Procedure

Interview for MTech Admission will be held on 16.07.2009 at 10:00am in respective department. No separate interview letter will be issued for this. Once selected finally they will have to submit their original documents and the Institute fees as per notification, only then the seat will be confirmed. The date of registration will be notified on the same day. They will have to deposit the institute fee and the hall fee as given below on 20th & 21st July 2009. Classes will start from 22.07.2009.

The candidates are required to apply in prescribed application form downloadable form Institute www.nitjsr.ac.in Completed application form must contain a crossed Bank Draft of Rs. 500/- (Rs. Five Hundred only), Rs. 250/- (Rupees Two hundred fifty) only for SC/ST drawn in favour of NIT, Jamshedpur, payable at State Bank of India, R.I.T., Branch, Jamshedpur (Code N0: 1882).

The application form should be accompanied with:

F       Three recent passport size photograph of the candidate attested by Gazetted Officer/Principal of the college/ Institute last attended.

F       Attested copy of certificate of Matriculation or equivalent examination as proof of age of the candidate.

F       Attested copy of the mark sheet of all the examination. The completed application form should be sent to the Prof. I/C (Academic), NIT, Jamshedpur, P.0: RIT, Jamshedpur – 831014, Distt: Saraikela – Kharsanwa, (Jharkhand State) Pin: 831014 so as to reach on or before the closing date i.e. 15.06.2009.

                                         Download the Application Form

Fee details for MTech 1^st Semester:

The above mentioned fee may be revised any time by the Institute. The fee of Rs. 15,450/- is to be deposited in the form of demand draft in favour of NIT, Jamshedpur, payable at S.B.I., R.I.T., Branch (Code – 1882) and the remaining amount of Rs. 2,000/- i.e. mess advance in cash.

+

To know more Information about this course click here