Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

Indian Institute of Information Technology Design and Manufacturing, IIITDM, Jabalpur

About Indian Institute of Information Technology Design and Manufacturing:
Probably at no previous moment in the world history have commerce and industry become so complex, extensive, and globally interrelated as they are today. India, which is going through a rapid growth in its manufacturing sector, is not unaffected by these changes. The modern manufacturing environment entails a large variety of cross-disciplinary activities including the Design and IT. Engineers consequently are being called upon to work within new environmental, economical and social constraints which are increasingly becoming a part of contemporary engineering practice. Obviously, these elements need to find their way into the engineering curricula. However, traditional engineering instructional formats isolate teaching and research into specific disciplines with un-integrated curricula and therefore the structure of our engineering curricula have hardly changed in accordance with the modern manufacturing needs. Such divisions in the existing higher education formats are found to act as barriers to learning, behavior, and performance.

Another aspect of engineering education which needs to be considered is the basic nature of the IT profession. The IT driven market of today features a model of innovation which is quite different from the research models that most institutes are familiar with. The new market model for innovation emphasizes on fast concept, funds projects with venture capital, fosters innovation by rewarding entrepreneurs who specialize in transforming people's practices to become more productive with the help of new technology. In contrast, the conventional research model emphasizes on careful development of ideas and principles and achieves innovation only after ideas have gone through a long pipeline that distills out the best and brings them into practice over a period of 15-20 years. This dichotomy between the new market-driven model and the conventional idea-pipeline model poses another great challenge to educators of engineering.

The current engineering education system in India, though huge and diverse, is mainly based on the conventional idea of pipeline model. To integrate the knowledge of a given discipline with IT enabled design, prototyping as well as manufacturing considerations, a need therefore exists for developing a new academic programmes. Apart from laying an emphasis on IT, the new approach should also give emphasis on aesthetic, ergonomic and functional considerations of products. The academic programme should also be able to respond to industry driven adaptive management structure.

With above requirements in mind, the Ministry of Human Resource Development (MHRD), Government of India, felt the need to set up a national institute devoted exclusively for Information Technology (IT), Design & Manufacturing (D & M). It was envisaged that such an academic institute would promote excellence in the desired areas of specialization and would facilitate and promote the competitive advantage of Indian products and manufacturing in global markets. Further, the new Institute would serve as an inter-disciplinary institution for education and research by keeping the concept of Product Lifecycle Management (PLM) in mind. The India Institute of Information Technology, Design & Manufacturing (IIITDM) Jabalpur was thus established in January 2005. Strong industry interface and close cooperation with other academic and research institutions are the key features of this Institute.

To know more about Indian Institute of Information Technology Design and Manufacturing, please contact us by clicking below
Contact Us
List of available courses
Course Name: MTech
Course Description: Master of Technology (M.Tech.) [Computer Science and Engineering (AI and ML/Data Science), Electronics and Communication Engineering with specialization in: (a. Communication System Design, b. Nanoelectronics and VLSI Design, c. Power and Control), Mechatronics Programme, Smart Manufacturing]
Opening Date: 29 Nov 2021
Closing Date: NA
Category: Engineering

Eligibility:
1.    Computer Science & Engineering (CSE):

B Tech/ BE (details attached in Annexure I) with

a.     A minimum of 60 percent marks OR a CPI/CGPA of 6.5 (on the scale of 10.00) or equivalent as the specified minimum for admission in a master’s programme

b.    valid GATE score of the year 2019/2020/2021 in Computer Science and Information Technology (CS).

2.    Electronics & Communication Engineering (ECE)

B Tech/ BE (details attached in Annexure I) with

a.     A minimum of 60 percent marks OR a CPI/CGPA of 6.5 (on the scale of 10.00) or equivalent as the specified minimum for admission in a master’s programme

b.    valid GATE score of the year 2019/2020/2021 in Electrical Engineering -(EE) or Electronics and Communication Engineering - (EC).

3.    Mechatronics:

B Tech/ BE (details attached in Annexure I) with

a.     A minimum of 60 percent marks OR a CPI/CGPA of 6.5 (on the scale of 10.00) or equivalent as the specified minimum for admission in a master’s programme

b.    valid GATE score of the year 2019/2020/2021 in Electronics and Communication Engineering -(EC) or Electrical Engineering -(EE) or Computer Science and Information Technology (CS) or Mechanical Engineering -(ME) or Production and Industrial Engineering (PI) or Engineering Sciences (XE).

B Tech/ BE (details attached in Annexure I) with

4.    Smart Manufacturing:

a.     A minimum of 60 percent marks OR a CPI/CGPA of 6.5 (on the scale of 10.00) or equivalent as the specified minimum for admission in a master’s programme

b.    Valid GATE score of the year 2019/2020/2021 in Electronics and Communication Engineering -(EC) or Electrical Engineering -(EE) or Computer Science and Information Technology (CS) or Mechanical Engineering -(ME) or Production and Industrial Engineering (PI) or Engineering Sciences (XE).

How to apply:
General Information:

1.     Reserved seats will be filled as per Govt. of India rules, (ii) Institute Assistantship is provided to Master’s students as per Govt. of India rules.

2.     For detailed information about the M.Des. programme, please go through the link: http://site.iiitdmj.ac.in/download/BOG%20minutes/ordinances%20of%20PDPMIIITDM%20Jabalpur.pdf and to fill up online application form please go through the link http://admission.iiitdmj.ac.in

3.     Last date for submission of online application is 05-12-2021 Kindly note that Institute will accept only online application forms. A sum of Rs. 500/- for Gen, EWS and OBC and Rs 300/- for SC/ST category candidates to be paid online towards application. The list of short-listed candidates and other announcements regarding admission will be uploaded on Institute’s website and http://admission.iiitdmj.ac.in

Address for Communication:

Assistant Registrar (Academic),

PDPM IIITDM Jabalpur

Dumna Airport Road,

Post Khamaria, Jabalpur (MP) – 482005

Comments:
Date of start to fill up on-line application: 23^rd November, 2021

Last date of filling up on line application and Submission of relevant documents if any: 5^th December, 2021

Announcement of short-listed candidates for written test/ interview: 8^th December, 2021

Date of Interview: 15^th December, 2021

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot

Course Name: PhD Full time and Part time
Course Description: Doctor of Philosophy (PhD) Full time/Part time [Doctoral Programme in Computer Science & Engineering (CSE), Electronics & Communication Engineering (ECE), Design, Natural Science (NS)-Mathematics and Physics and English (LA)]
Opening Date: 29 Nov 2021
Closing Date: NA
Category: Miscellaneous Courses

Eligibility:

A minimum of 60 percent marks OR a CPI/CGPA of 6.0 (on the scale of 10.00) shall be required at the master’s level qualifying examination (M.Tech./ M.E. /M.Des. etc.) as the specified minimum for admission in a Ph.D. programme for concerned disciplines. Please see the table below for the eligibility criteria for each discipline.

PhD (Name of the Discipline)	Minimum Qualifications*	Other Essential Requirement	Desirable
PhD in Computer Science and Engineering	ME/M.Tech in (CS/ CSE/ IT /CE /CST/CT/ CSA/ or in any CS related Subjects like AI/Software Systems/Computing/Machine Learning Etc.)	Qualified GATE in Computer Science and Information Technology (CS)	Graduate Degree as per the Annexure-1
PhD in Electronics and Communication Engineering	ME/M.Tech in (EE/ ECE/ PC/ ICE/MT) or in any EE or ECE related Subjects.	Qualified GATE in Electrical Engineering (EE) or Electronics and Communication Engineering (EC).	Graduate Degree as per the Annexure-1
PhD in Design	Master’s degree (2 years duration) in Design (MDes), Technology (MTech) and Architecture (M.Arch.) Master’s degree in fine arts, Drawing, Painting and Architecture. However, such candidates must hold Bachelors’ degree om Design/ Engineering/Technology/ Architecture.	Qualified GATE/CEED NET or similar National Eligibility Test	Graduate Degree as per the Annexure-1
PhD in Natural Science (Physics and Mathematics)	M.Sc. /M.Phil. in Physics or Mathematics or relevant area	Qualified CSIR/UGC/ JRF A candidate who has qualified CSIR/ UGC-NET are eligible for monthly assistantship but does not qualify CSIR/UGC/ JRF will be admitted without assistantship
PhD in English	MA/M.Phil in English	CSIR/UGC-JRF A candidate who has qualified CSIR/UGC-NET but does not qualify CSIR/UGC-JRF will be admitted without assistantship

*Minimum duration for such masters’ programme shall be two years.

Special Part Time Ph.D. Programme for working Professionals

The person employed in defense or railway establishment or in a company/industry having turnover of Rs. 100 crores or more at executive position and have 5 years or more experience in a company are eligible for admission under this category. For the persons employed in defense organization, the minimum experience requirement will be waived but such candidates must be properly forwarded by their parent organizations.

Following conditions will apply:

a. Such candidates will be recommended by their parent department and approved by the discipline committee of the concerned discipline for the PhD admission.

b. Requirement of GATE/CEED will be waived for such candidates.

c. Such candidates are required to carry out the course work along with the regular PhD students of the Institute.

d. Most of their research work will be carrying out at their parent organization only.

e. For such candidates residence requirement will be waived. Further, they will be given waiver for Communication English course and teaching credits but they need to fulfill all other requirements of Ph.D. programme.

f. The candidates will have a supervisor from the Institute and one external supervisor from the concerned establishment.

g. An MoU will be signed with all establishment/unit for the purpose.

The Institute shall not be providing any assistantship/ fellowship to such a student.

Direct Admission to Ph.D after B.Tech

Students who are currently in their final year in any of the Centrally Funded Technical Institutions (CFTIs) will only be eligible for the admission under this category. To be eligible for the admission under this category, a candidate is required to have a minimum CPI of at least 8.0 CPI or equivalent (on a scale of 10) at the end of the seventh semester under OPEN and OBC or EWS categories. For SC/ST category students, the minimum CPI requirement will be relaxed to 7.0. Qualified and valid NET/GATE/CEED score is mandatory in this case. They shall be admitted through the same regular admission process as specified for the regular Ph.D. students. Such students will be considered under the Institute Assistance category.

How to apply:

General Information:

1. Relaxation for reserved category in the eligibility requirements shall be as per Govt. of India norms.

2. In case of sponsored and part time categories, candidates shall have a regular employment and shall be required to apply through proper channel (the employer or her/his authorized signatory). Such candidate shall have served for at least two years in a reputed R&D establishment/ organization/ academic institution/ company associated with design, development and/or manufacturing of engineering products.

3. For detailed information about the Ph.D. Programme, please go through the link: http://www.iiitdmj.ac.in/academics/download/Academic%20Guidelines_271017.pdf and to fill up online application form please go through the link: http://admission.iiitdmj.ac.in/

4. Last date for the filling of application along with upload of required documents is 05/12/2021. Kindly note that Institute will accept only online application forms. Fee of Rs. 500/- for Gen and OBC & Rs. 300/- for SC/ST category candidates by Online mode.

Link for payment is http://services.sabpaisa.in/pages/iitdm.html#ChildVerticalTab_12.

5. The list of short-listed candidates and other announcements regarding admission will be uploaded on Institute’s website.

Address for communication:

Assistant Registrar (Academic),

PDPM IIITDM Jabalpur,

Dumna Airport Road,

Post: Khamaria, Jabalpur (MP) – 482005

Comments:

Date of start to fill up on-line application: 23^rd November, 2021

Last date of filling up on line application and Submission of relevant documents if any: 5^th December, 2021

Announcement of short-listed candidates for written test/Interview: 8^th December, 2021

Date of Interview: 14^th December, 2021 (Tuesday)

Submission of Selection Committee report to the academic office: 17^th December, 2021 (Friday)

Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot

Course Name: Integrated Masters and PhD Programme
Course Description: Integrated Masters + Ph.D. Programme [in Computer Science & Engineering (CSE), Electronics & Communication Engineering (ECE), and Design (DS)] Full time
Opening Date: 29 Nov 2021
Closing Date: NA
Category: Miscellaneous Courses

Eligibility:

A minimum of 65 percent marks OR a CPI/CGPA of 7.0 shall be required at the Bachelor’s level qualifying examination (B.Tech./ B.E. /B.Des.) in the concerned disciplines. Please see the table below for the eligibility criteria for each discipline. The candidate must have a valid GATE score of 2019, 2020 or 2021.

Integrated PhD (Name of the Discipline)	Minimum Qualifications*	Other Essential Requirement
Integrated Ph.D. in Computer Science and Engineering	As specified in Annexure I	Qualified GATE in Computer Science and Information Technology (CS)
Integrated Ph.D. in Electronics and Communication Engineering		Qualified GATE in Electrical Engineering (EE) or Electronics and Communication Engineering (EC).
Integrated Ph.D. in Design		Qualified GATE/CEED

*Minimum duration for such Bachelors’ programme shall be four years.

How to apply:

General Information:

1. Relaxation for reserved category in the eligibility requirements shall be as per Govt. of India norms.

4. Last date for the filling of application along with upload of required documents is 05-12-2021. Kindly note that Institute will accept only online application forms. Fee of Rs. 500/- for Gen and OBC & Rs. 300/- for SC/ST category candidates by online mode. Link for payment is http://services.sabpaisa.in/pages/iitdm.html#ChildVerticalTab_12.

The list of short-listed candidates and other announcements regarding admission will be uploaded on Institute’s website and http://admission.iiitdmj.ac.in/

Address for communication:

Assistant Registrar (Academic),

PDPM IIITDM Jabalpur,

Dumna Airport Road,
Post: Khamaria, Jabalpur (MP) – 482005

Comments:

Date of start to fill up on-line application: 23^rd November, 2021

Last date of filling up on line application along with upload of relevant documents and payment of application fees 5^th December, 2021

Announcement of short-listed candidates for written test/ interview: 8^th December, 2021

Date of Interview for the shortlisted candidates: 14^th December, 2021

Course Name: MTech Part Time
Course Description: Master of Technology (M.Tech.) [for Working Professionals] Part Time
Opening Date: 29 Nov 2021
Closing Date: NA
Category: Engineering

Eligibility:
Special Part time Master’s Programme for Working Professionals:

The person employed in defense or railway establishment or in a company/industry having turnover of Rs. 100 crores or more at executive position and have 5 years or more experience in a company are eligible for admission under this category. For the persons employed in defense organization, the minimum experience requirement will be waived but such candidates must be properly forwarded by their parent organizations.

Following conditions will apply:

a.     Such candidates will be recommended by their parent department and approved by the discipline committee of the concerned discipline for the PhD admission.

b.     Requirement of GATE/CEED will be waived for such candidates.

c.     Such candidates are required to carry out the course work along with the regular PhD students of the Institute.

d.     Most of their research work will be carrying out at their parent organization only.

e.     For such candidates residence requirement will be waived. Further, they will be given waiver for Communication English course and teaching credits but they need to fulfill all other requirements of Ph.D. programme.

f.      The candidates will have a supervisor from the Institute and one external supervisor from the concerned establishment.

g.     An MoU will be signed with all establishment/unit for the purpose.

The Institute shall not be providing any assistantship/ fellowship to such a student

How to apply:
General Information:

1.     Reserved seats will be filled as per Govt. of India rules, (ii) Institute Assistantship is provided to Master’s students as per Govt. of India rules.

2.     For detailed information about the M.Des. programme, please go through the link: http://site.iiitdmj.ac.in/download/BOG%20minutes/ordinances%20of%20PDPMIIITDM%20Jabalpur.pdf and to fill up online application form please go through the link http://admission.iiitdmj.ac.in

3.     Last date for submission of online application is 05-12-2021 Kindly note that Institute will accept only online application forms. A sum of Rs. 500/- for Gen, EWS and OBC and Rs 300/- for SC/ST category candidates to be paid online towards application. The list of short-listed candidates and other announcements regarding admission will be uploaded on Institute’s website and http://admission.iiitdmj.ac.in

Address for Communication:

Assistant Registrar (Academic),

PDPM IIITDM Jabalpur

Dumna Airport Road,

Post Khamaria, Jabalpur (MP) – 482005

Comments:
Date of start to fill up on-line application: 23^rd November, 2021

Last date of filling up on line application and Submission of relevant documents if any: 5^th December, 2021

Announcement of short-listed candidates for written test/ interview: 8^th December, 2021

Date of Interview: 15^th December, 2021

Please click the following link for other valuable news available on our Blog: -   blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Course Name: Master of Design MDes
Course Description: Master of Design (MDes)
Opening Date: 25 Jun 2016
Closing Date: NA
Category: Miscellaneous Courses

Eligibility:
B.Tech/B.E./B.Arch./B.Des./BFA/M.Sc./M.A./MCA with (a) minimum marks/CPI in Qualifying Degree and (b) valid CEED score for regular students.

Minimum marks/CPI in Qualifying Degree for M.Des.: 55% marks / 5.5 CPI (on a 10-point scale) as long as it is at least seven percent higher than the minimum pass marks /CPI for General Category applicants and minimum passing marks for SC/ST/OBC applicants.

General information:

Reserved seats will be filled as per Govt. of India rules,

Institute Assistantship is provided to M.Des. students as per Govt. of India rules.

How to apply:
Application forms and detailed information can be downloaded from the Institute website. Filled up Application Forms along with a Demand Draft of Rs. 200/- for Gen and OBC & Rs.100/- for SC/ST category candidates, in favor of The Registrar, PDPM IIITDM Jabalpur, issued by any nationalized bank, payable at Jabalpur, through Speed/ Registered Post only. The envelop containing filled application form should superscribed with “Application for admission to (Programme name) and (discipline)”.

Comments:
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Course Name: Bachelor of Design BDes
Course Description: Bachelor of Design (BDes)
Opening Date: 25 Jun 2016
Closing Date: NA
Category: Miscellaneous Courses

Eligibility:
The candidate should have born on or after October 01, 1995 if belonging to the GEN or OBC-NCL category and on or after October 01, 1990 if belonging to the SC, ST or PwD category.

Candidates should have Class XII (or equivalent) examination in 2016, OR passed or appeared in 2016 for the class XII (or equivalent) examination. Those who appeared for the first time in their Class XII (or equivalent) examination in 2016 or earlier are not eligible.

How to apply:
Institute will accept only online application forms submitted along with copy of the demand draft (scan copy to be uploaded) of Rs. 500/- for Gen and OBC & Rs. 300/- for SC/ST category candidates.

Demand draft has to be drawn in favor of The Registrar, PDPM IIITDM Jabalpur, issued by any nationalized bank, payable at Jabalpur. Candidates should send the original demand draft through post.

Selection Procedure for IIITDM, Jabalpur:

Admission to B.Des program is based purely on the basis of UCEED score and rank conducted by IIT Bombay.

Comments:
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Course Name: Doctor of Philosophy PhD Design
Course Description: Doctor of Philosophy (PhD) (Design)
Opening Date: 09 Jul 2015
Closing Date: NA
Category: Fashion Technology

Eligibility:
M Des with minimum marks/ CPI in Qualifying Degree

Minimum % of marks in Qualifying Degree for Ph.D.: 55% marks or CPI of 5.5 (on a 10-point scale) for General Category applicants and minimum passing marks for SC/ST/OBC applicants

General information:

Reserved seats will be filled as per Govt. of India rules,

Institute Assistantship is provided to Ph.D. students as per Govt. of India rules.

How to apply:
Application Form: The detailed information about on line application for PG admission can be downloaded from the Institute website www.iiitdmj.ac.in

Filled up application forms along with a demand draft of Rs 500/- for general/OBC and Rs 300/- for SC/ST category candidates, in favor of the Registrar, PDPM IIITDM Jabalpur, issued by any nationalized bank, payable at Jabalpur through speed/registered post only
Applicants must write the programme and the discipline applied for, on the cover of the envelope
The list of short listed candidates and other announcements regarding admission will be uploaded on Institute’s website www.iiitdmj.ac.in

Comments:
Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Course Name: MTech Computer Science and Engineering
Course Description: MTech (Computer Science & Engineering) (Regular)
Opening Date: 06 Nov 2013
Closing Date: NA
Category: Information Tech (IT)

Eligibility:
B Tech/ BE in any engineering discipline OR M Sc in Mathematics, Statistics or a similar discipline OR MCA with (a) minimum marks/CPI in Qualifying Degree and (b) valid GATE score in Computer Science and Engineering/ Information Technology/ Mathematics/ Engineering Sciences (compulsorily with Sections Computational Science and Electrical Science) for regular students.

Minimum marks/CPI in Qualifying Degree for M.Tech.: 55% marks / 5.5 CPI (on a 10-point scale) as long as it is at least seven percent higher than the minimum pass marks /CPI for General Category applicants and minimum passing marks for SC/ST/OBC applicants.

General information:

Reserved seats will be filled as per Govt. of India rules,

Institute Assistantship is provided to M.Tech. Students as per Govt. of India rules.

How to apply:
Application Form: The detailed information about on line application for PG admission can be downloaded from the Institute website www.iiitdmj.ac.in

Filled up application forms along with a demand draft of Rs 200/- for general/OBC and Rs 100/- for SC/ST category candidates, in favor of the Registrar, PDPM IIITDM Jabalpur, issued by any nationalized bank, payable at Jabalpur must be received latest by 15th November, 2013 through speed/registered post only
Applicants must write the programme and the discipline applied for, on the cover of the envelope
The list of short listed candidates and other announcements regarding admission will be uploaded on Institute’s website www.iiitdmj.ac.in

Comments:
Last date for Submission form: 15^th November, 2013

Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~ Admission News BlogSpot ~~!!~~ Scholarship BlogSpot
Course Name: MTech Electronics and Communication Engineering Regular Sponsored and External
Course Description: MTech (Electronics and Communication Engineering) (Regular)
Opening Date: 06 Nov 2013
Closing Date: NA
Category: Engineering

Eligibility:
B Tech/ BE in Electronics/ Electronics and Communication Engineering/ Electrical Engineering/ Electrical and Electronics Engineering/ Instrumentation Engineering or a similar discipline OR M Sc in Electronics/ Electronics Science/ Physics/ Mathematics or a similar discipline with (a) minimum marks/CPI in Qualifying Degree and (b) valid GATE score in Electronics and Communication Engineering/Electrical Engineering/Instrumentation Engineering/Physics for regular students.

Minimum marks/CPI in Qualifying Degree for M.Tech.: 55% marks / 5.5 CPI (on a 10-point scale) as long as it is at least seven percent higher than the minimum pass marks /CPI for General Category applicants and minimum passing marks for SC/ST/OBC applicants.

General information:

Reserved seats will be filled as per Govt. of India rules,

Institute Assistantship is provided to M.Tech. Students as per Govt. of India rules.

How to apply:
Application Form: The detailed information about on line application for PG admission can be downloaded from the Institute website www.iiitdmj.ac.in

Filled up application forms along with a demand draft of Rs 200/- for general/OBC and Rs 100/- for SC/ST category candidates, in favor of the Registrar, PDPM IIITDM Jabalpur, issued by any nationalized bank, payable at Jabalpur must be received latest by 15th November, 2013 through speed/registered post only
Applicants must write the programme and the discipline applied for, on the cover of the envelope
The list of short listed candidates and other announcements regarding admission will be uploaded on Institute’s website www.iiitdmj.ac.in

Comments:
Last date for Submission form: 15^th November, 2013

Please click the following link for other valuable news available on our Blog: - blog.admissionnews.com ~~!!~~ My Admission News Blog ~~!!~~Admission News BlogSpot ~~!!~~ Scholarship BlogSpot